How to make silicone rubber heater

1. What's silicone rubber heater

Silicone rubber heaters from are composed of fiberglass reinforced silicone rubbers that are moisture and chemical resistant. Thin and flexible, silicone rubber heater elements are designed to meet the requirements of various low and medium temperature applications that require irregular shapes, sizes, and dimensions. Silicone heaters are known for their unique and flexible properties and can withstand mechanical shock and vibration. Silicone heaters have unique qualities such as a high dielectric strength, non-toxicity, and flame retardance. Silicone heaters consist of two "wafers" of silicone with a heating resistor sandwiched in between. Thermostat controls are options that are used to help reach your target temperature. Teflon lead wires exit any location of your choosing and are offered at any length you require. Perfect for applications that require direct heat such as surfaces, barrels, conical shapes as well as in cylinders and small areas where traditional electric heating elements cannot fit. Adhesive backing is also available to help with fixation. Silicone heaters are used in applications requiring temperatures upwards of 450 degrees F such as freeze protection of electrical enclosures.

silicone rubber heater factory

2.Silicone rubber heater characteristics

1)the highest temperature resistance of insulation materials: 250 ° C

2) the maximum use temperature: 250 ° C -300 ° C

3) Insulation resistance: ≥5MΩ

4) pressure strength: 1500v/5s

Can be made in a variety of shape sizes (such as round, oval, vertebra).

Can be drilled, back mounted or bundled.

Dimensions up to 1.2m ×Xm Minimum 15mm × 15mm Thickness 1.5mm (thinest 0.8mm, maximum thickness 4.5mm) Lead length: standard 130mm, beyond the above size, special order.

The back side is coated with a backing glue or a pressure sensitive adhesive or a double-sided tape, so that the silicone heat-generating sheet can be firmly adhered to the surface of the object to be added. Easy to install.

It can be customized according to the voltage, power, size and product shape required by the user (such as oval, cone, etc.).

3.Siilicone rubber heater wire type:

4.Silicone rubber heater application:

1) Thermal transfer equipment;

2) Prevent condensation in motors or instrument cabinets;

3) Freeze or condensation prevention in housings containing electronic equipment, for examples: traffic signal boxes, automatic teller machines, temperature control panels, gas or liquid control valve housings

4) Composite bonding processes

5) Airplane engine heaters and aerospace industry

6) Drums and other vessels and viscosity control and asphalt storage

7) Medical equipment such as blood analyzers, medical respirators, test tube heaters, etc.

8) Curing of plastic laminates

9) Computer peripherals such as laser printers, duplicating machines

Application of silicon rubber heater.webp

5. how to make a order of silicone rubber heater:

Size, Wattage & Voltages are available on request.

1) size.

When looking for a heater quote, the size of silicone rubber heater is needed.like width,length,thickness etc.

2) Voltage

The right voltage is according to your application.low voltage:like 12V silicone rubber heater,24V silicone rubber heater.

3)Wattage

The right wattage is essential for silicone rubber heaters. The wattage needs to be matched to the heater area heated, it's intended resistance, temperature, and materials.

4)Wire type

The wire type is also according to your application, you can refer to the picture of silicone rubber wire type.

5) Whether you need temperature controller, digital or dial or anti-explosinl?

Shenglong Heaters as a silicone rubber heater manufacturers, which type silicone heater can be made:

silicone rubber heater mat

silicone rubber heater pad

silicone rubber heater blanket

silicone rubber band heater

silicone rubber drum heater

silicone rubber flexible heater

waterproof silicone rubber heater

silicone rubber electrical strip heaters